Key-Visual Photonics West 2019
Logo Photonics West 2019

German Pavilion at
Photonics West 2019

What is German Pavilion?

5 – 7 February 2019 – San Francisco, USA

News & Innovations

News and innovations published by German exhibitors

New High Power Driver

The modular product line DPD for CW operation is powered by a 3-phase input voltage 196V … 530V. It has an integrated power factor correction (PFC). The power ranges up to 4800W with a modular configurable diode current up to…

Exhibitor: MESSTEC Power Converter GmbH

Further reading

New Low Power Driver

The laser drivers LPD 2-25 and LPD 2-50 are a low power drivers which can be used for low diode currents up to 2A for CW- pulsed and modulated operation. The maximum diode voltage is 23V or 46V.

Exhibitor: MESSTEC Power Converter GmbH

Further reading

Display measurements set up individually

Premium spectroradiometers can be set up as a DTS system for individual display measurements. The light radiation is launched with the TOP 200 telescopic optical probe connected to the spectrometer by an optical fiber. Due to the flexible fiber connector,…

Exhibitor: Instrument Systems

Further reading

High-resolution spectroradiometry

Instrument Systems supports the optoelectronics industry in innovative product development by supplying state-of-the-art equipment for light measurement. This also holds true for laser light sources that are constantly gaining in importance for scientific and high-tech applications, e.g. autonomous driving. Instrument…

Exhibitor: Instrument Systems

Further reading

Grayscale lithographic mastering of tailored micro-optical elements

Optical systems benefit from customized components like freeforms introducing additional design freedoms to the cost of complex surface shapes that are often hard to engineer. Optical grayscale lithography is a versatile technology to manufacture arbitrary surface profiles to address DOEs…

Exhibitor: Fraunhofer Institute for Applied Optics and Precision Engineering IOF

Further reading

CO2 concentration measurement in incubators – precise and long-term stable with Incubator IR CO2 Sensor

We present the development of a sensor that sets new standards. Thus, we enable the manufacturers of cell incubators to reliably measure carbon dioxide with NDIR sensors.Advantages:High accuracy through 5-point calibration instead of the usual standard 3-point calibration. Long lifetime…

Exhibitor: Micro-Hybrid Electronic GmbH

Further reading

optoNCDT 2300-2DR Blue laser sensor combines speed and precision

The optoNCDT 2300-2DR blue laser sensor is specially designed for displacement and distance measurements on directly reflecting surfaces. On reflective and shiny surfaces, the sensor operates at high speed and provides maximum precision in the nanometer range. Its ultra-compact design…

Exhibitor: MICRO-EPSILON Messtechnik GmbH & Co. KG

Further reading

Confocal-chromatic sensors: ultra-compact sensor and high precision

The confocalDT system from Micro-Epsilon stands for high precision confocal chromatic measurement technology. The new IFS2404-2 sensor is used for high precision distance and thickness measurements of transparent materials. With a diameter of just 12 mm, the sensor can also…

Exhibitor: MICRO-EPSILON Messtechnik GmbH & Co. KG

Further reading

Nano-resolution capacitive displacement sensors

With the capaNCDT 6230, Micro-Epsilon offers a capacitive measuring system that can be extended up to four measurement channels for nano-resolution displacement measurement. The DL 6230 demodulator provides up to 8 times higher resolution for reaching even higher performance levels.The…

Exhibitor: MICRO-EPSILON Messtechnik GmbH & Co. KG

Further reading

ALO4. THE NEXT GENERATION.

The all new ALO4 can be customized for all individual tactile brazing and welding applications. Benefits: Fully integrated wire-feeder-system for easy handling via optics’ user interface New optics control with integrated protective glass monitoring, media flow control and triggering of…

Exhibitor: Scansonic MI GmbH

Further reading

New CW Laser Driver

We would like to present our 2 new CW Laser Drivers D 1900-80 and D 3300-60 which are now available.The technical features at a glance:D 1900-80: electrical output power 1900W at a diode current of 80A and a diode voltage…

Exhibitor: MESSTEC Power Converter GmbH

Further reading

AMPYR® LED Evaluation Kit

The AMPYR evaluation kits LED30UV have been developed for the fast and easy evaluation of LEDs up to 25 W.Using the the LED30UV it is possible to carry out initial tests and test series with▪▪ UV-C LEDs, e.g. for disinfection,…

Exhibitor: LEJ || Lighting & Electronics Jena

Further reading

AMTRON presents flexible and fast process controller

Another innovation presented by AMTRON is the process controllerCU190.The process controller CU190 stands out with its fast power modulation,which makes it ideal for regulating and controlling the processes betweenthe system and the laser. The device offers a range of connections…

Exhibitor: Amtron GmbH

Further reading

AMTRON launches the next generation SE200 pyrometers with faster measurement rate

With the new SE260 pyrometer series, AMTRON brings the ultimateprocess temperature measurement tool into the market, which is capable toacquire plastic welding information within a 10kHz range.This opens pyrometry for galvo-scan applications or laser processes withvery low temperature radiation.The SE260…

Exhibitor: Amtron GmbH

Further reading

AMTRON unveils brand new CM100 Gen. III laser diode drivers with outstanding features

AMTRON is proud to present a new generation of the successful CM100series. With various housings in paperback format, the CM100 models offerpower values up to 18kW with top-class ratings:The CM100 supplies diode lasers with up to 350A CW or up…

Exhibitor: Amtron GmbH

Further reading

Approaching global market leadership: OPTOFLUX acquires Asian specialists in precision injection

OPTOFLUX in Nuremberg, the European market leader for optical injection molding, is taking over the Philippine subsidiary HPOI of the Japanese HOYA Group.This strategic move will extend the customer base, adding known manufacturers of digital cameras, mobile devices and virtual…

Exhibitor: OPTOFLUX GmbH

Further reading

Wide range micro spectrometer UV2NNIR

Based on our class visible range spectrometers, INSION continues to expand the measurement range from UV to NNIR (200 - 1050 nm). With our UV LED light source(280 nm - 450 nm), you can achieve the miniaturization of your measurment…

Exhibitor: INSION GmbH

Further reading

Ultra Miniature Multistage Thermoelectric Coolers

TEC Microsystems GmbH introduces ultra-miniature multistage thermoelectric coolers (TECs). Advanced miniaturization technology in combination with bulk BiTe thermoelectric material allows to create ultra-small multistage TECs. Without performance loss the dimensions are smaller by a factor of two than typical solutions.…

Exhibitor: TEC Microsystems GmbH

Further reading

Optimized power supplies for diode and fiber lasers

LEJ offers customized power supplies for lasers. Our competencies give you access to highly customized power supplies, tailored to your very specific needs, driven by customers and applications.- 1 KW class20 VDC || 50 A || 5 kHz pulse frequency-…

Exhibitor: LEJ || Lighting & Electronics Jena

Further reading

Efficiency, Efficiency, Efficiency - Boost your Laser with Diffraction Gratings

Today’s Laser market, especially the segment of ultrafast lasers, is dynamically growing and highly competitive.You need to be fast and innovative in optimizing your systems. But what makes a good laser better? Definitely an increase in efficiency - because efficiency…

Exhibitor: Gitterwerk GmbH

Further reading

Cooled High-Performance sCMOS Cameras by greateyes

greateyes is proud to introduce its latest innovation, a novel high-performance scientific CMOS camera. It features a 4.2 MP back-illuminated sCMOS sensor with up to 95% quantum efficiency (QE), frame rates of up to 50 fps (full frame) and deep…

Exhibitor: greateyes GmbH

Further reading

Full value chain in UV LED technology

The FBH conducts R&D on (Ga,Al,In)N UV LEDs with customized wavelengths from 230 to 320 nm. Activities target high power conversion efficiency, reliability, and tailored spatial emission characteristics. FBH performs all stages of device fabrication in-house, from design to epitaxial…

Exhibitor: Ferdinand-Braun-Institut – Leibniz-Institut für Höchstfrequenztechnik

Further reading

Corrosion-free marking of medical instruments

PHOTON ENERGY is a leading supplier for innovative laser marking solutions. Especially for corrosion-free marking of medical steel PHOTON ENERGY provides new technologies which differ substantially from common laser marking technologies. PHOTON ENERGY's markings are resistant against corrosion and fading…

Exhibitor: PHOTON ENERGY GmbH

Further reading

ilumVISION - New laser diode module for the area of machine vision

In addition to cameras, the high-growth market of machine vision also requires ever more complex forms of illumination.IMM Photonics presents the new laser diode module series ilumVISION as a solution for demanding illumination needs.The new laser diode module with homogeneous…

Exhibitor: IMM Photonics GmbH

Further reading

The new standard kilogram – A JOINT RESEARCH PROJECT FROM PTB AND HAUSER

In 2015 one of the biggest challenges in the history of HAUSER OPTIK and also an extremely exciting project started: The PHYSICALLY - TECHNICAL FEDERAL INSTITUTE (PTB), Braunschweig, has been developing the new Standard Kilogram, which shall replace the actual…

Exhibitor: J. Hauser GmbH & Co. KG

Further reading

Next generation terahertz transceiver

Terahertz radiation is increasingly employed in industrial environments for process monitoring and material inspection. The layer thickness of coatings, the structure of polymer components or imperfections in non-conductive materials can be measured. HHI presents the next generation of fiber coupled,…

Exhibitor: Fraunhofer Institute for Telecommunications Heinrich Hertz Institute HHI

Further reading

Advances in high-power diode lasers

The FBH has a strong R&D focus on high-power diode lasers and will showcase its latest research results and broad performance progress in this rapidly advancing field. An overview will be presented by Prof. Tränkle, director of the FBH, in…

Exhibitor: Ferdinand-Braun-Institut – Leibniz-Institut für Höchstfrequenztechnik

Further reading

Laser systems for spaceborne quantum optical metrology

FBH develops particularly compact and stable laser systems designed for harsh environments that rely on the sophisticated in-house micro-integration technology. Since 2008, the institute closely cooperates with Humboldt-Universität zu Berlin within its Joint Lab Laser Metrology, developing the laser systems…

Exhibitor: Ferdinand-Braun-Institut – Leibniz-Institut für Höchstfrequenztechnik

Further reading

News from the Seeding Experts!

The seed drivers from PicoLAS are specially designed to drive laser diodes in seeding applications for fibre-and solid state laser amplifiers. The BFPS-VRHSP 02 is the first seed driver available on the market which enables short pulse durations as low…

Exhibitor: PicoLAS GmbH

Further reading